Single Port, Poultry Feeder, 4 Gallon Pail, Complete
This 4 gallon pail is outfitted with our 90 degree, flanged elbow. Now your poultry feed is kept dryer with much less being billed out onto the ground. When elevated to about the height of the middle of your flocks back this poultry feeder keeps feed clean and poop free.
Poultry Bucket Feeder requires minimal assembly.
A screw driver is all that will be needed to complete the assembly. You will place the elbow through the hole in the side of the container and then screw the screws to secure it in place.
- 4 gallon container holds over 20 pounds of food
- 9" x 9" x 13" tall (approximately)
- Weather shield over opening
- These are new containers.
What's it look like inside?
||We have removed the top and cut one in half so you can see inside. The elbow reaches nearly to the middle of the 4 gallon container. The elbow is installed above the floor of the poultry feeder so a limited amount of grain can be had.
What's inside the box?
- 4 gallon container
- 90 degree elbow
- Rubber gasket